For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 335-01 plunge router attachment, Dremel 231 Shaper/Router Table and also older router attachments #230 and #330. Made of high-speed steel.

Now drill holes in glass with your Dremel rotary tool. This 1/8 In. (3.2mm) diamond-impregnated core-style bit features superior long life and is ideal for drilling in both flat and contoured surfaces. The 360-degree diamond grit circumferences the bit allowing it to be used in a rasping motion to enlarge holes when needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. For use on glass, ceramic wall tile, glass block, glass bottles, jewelry.

This Dremel Sanding Grinding Mini Accessory Kit 686-02 comes with everything you need to handle those projects, big and small. It comes with a durable, reusable storage case that has three dividers to offer individualized compartments. The grinding tool kit contains grinding stones, an abrasive wheel, a cut-off wheel and sanding bands. Sanding discs, a mandrel and a drum sander are also part of the package. All pieces are quality made to offer lasting performance.

This kit contains 69 cut-off wheels and a No. 402 mandrel to use with them. These assorted cutting pieces allow you to cut metal, wood and plastic and to cut or slot bolts, screws, sheet metal, thin wood and plastic.

Carve intricate details, etch glass, stoneware, terracotta and more! Contains 11 genuine Dremel accessories for most every engraving, etching, or intricate carving need.

Mini accessory case
11 Assorted accessories
2 Diamond points included
Carving and engraving mini set

An EZ Twist nose cap wrench, EZ Lock mandrel, and EZ Lock cut-off wheels are part of this 160-piece kit filled with genuine Dremel accessories. Offering reusable storage bins and lift-out trays for easy organization of the included bits, this kit is ready for cutting, grinding, polishing, sanding, cleaning and more. The kit also includes sanding bands, sandpaper discs, polishing compound, felt polishing wheels, aluminum oxide grinding stones, silicon carbide grinding stone, mandrels, wire brush, wrench, and a reusable carrying case with clear lid.

The Dremel 8220 variable-speed cordless rotary tool kit offers the highest performance and versatility of all Dremel cordless rotary tools. The strength of its motor facilitates maximum performance at all speed levels. In fact, with its 12VMAX lithium-ion battery technology, the Dremel 8220 has a 33% longer run-time than the Dremel 8200 cordless rotary tool when cutting screws. Our cordless rotary tool kit's list of included accessories is extensive, but for those who need even more flexibility, you can pair any Dremel rotary tool accessory or attachment with the 8220. Best of all, with the tool's slim ergonomic body, you'll get a 360-degree grip zone for control in any position.

3/8" ALUMINUM OXIDE GRINDING

The Dremel 9901 is a tungsten carbide cutters are ideal for shaping, smoothing or removing material from especially hard materials. Shapes, smoothaEUR(TM)s or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

High speed cutter made of tungsten carbide
Hardest material next to diamonds
Shapes, smoothest, removes hard material
Do not run in excess of 30,000 RPM
Screw-free design for easy locking and loading
A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
Bit diameter: 1/8 in.
Shank diameter 1/8 in., 3.2 mm

Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.

Fast cutting needle-sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, and rubber. 1/8" shank.

The Dremel Sanding Band EZ407SA-01 can help you complete your projects whether working at home or on the job site. It fits easily onto the one-piece drum mandrel. This rotary tool sanding band has a quality blend of materials that will work effectively to give your work a professional-looking finish. It's a quick and easy alternative. This convenient sanding band is compatible with all Dremel rotary tools. It allows you to sand flatly and on the edge, making it a handy option for various types of DIY projects.

Dremel EZ407SA-01 EZ Drum Sanding Band and Mandrel for Rotary Tools:

Provides a quicker and easier alternative to using a traditional sanding mandrel
Allows for flat sanding and edge sanding
Compatible with all Dremel rotary tools
1-piece EZ drum mandrel streamlines the process of changing sanding bands
Drum mandrel is compatible with Dremel 1/2" sanding bands 408, 432 and 445

The Dremel EZ Lock makes accessory changes easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. For use with the EZ402 EZ Lock Mandrel.

EZ LOCK EDGE GRINDING WHEEL

Use the Dremel EZ Lock Diamond Tile Cutting Wheel for cutting ceramic material such as 1/2 in. floor tile. It features a screw-free system for easy locking and loading, and can make straight cuts with little dust. It's compatible with Dremel rotary tools.

Compatible with Dremel rotary tools (sold separately)
Cuts 1/2 in. thick floor tile and other ceramic materials
Makes straight cuts with little dust
1-piece mandrel design eliminates the need for a screw and screwdriver
Easy to assemble
Please note: do not run in excess of 20,000 RPM
1-piece mandrel design eliminates the need for screw and screwdriver
Effortless locking and loading - no tiny mandrel screw to lose
First patented system of its kind; compatible with all Dremel rotary tools